Operating Guide of Lifting Magnet 31000 manufacturer from China Magnetic Products Co.,Ltd.

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 31000

Brand Name: MPCO

Operating Guide of Lifting Magnet.

Operations:

1.During operation,you should clear away the components surface such as rust and burr. The centerline

of lifter had better overlap with the centerline of component.The place the Magnetic Lifting Hoist on the

face of component,turn the nozzle from "OFF" to "ON" until "holding".Make sure that the security key on

the handles is auto-matically locked,and then start to hoist.

2.During lifting and handing components,overloading is forbidden.Nobody is allowed to pass through
under the component held by Magnetic Lifter.Components temperature and ambient temperature shall
be between +80 °c to -40 °c. No strong vibration and impact.

3.When lifting and handling cylindrical components,keeping the cylindrical surface contacting the vee
slot of lifter on two lines,the actual lifting capacity will generally be 30% of the rated lifting capacity.

4.When lifting and handling operation is finished ,press down the bottom to disengage the security
from the security pin,then turn the handle "ON"to"OFF"unitl"Release ".The lifter is now in the neutral
condition,it can be taken away from the component.